Friday, 19 November 2010

Photobucket

Tuesday, 16 November 2010

NEC Classic Motor Show


Had a good day out on Saturday last with my good friend Jack, Visited the Classic show at NEC Birmingham, apparently in previous years this show was dedicated to cars, but pleasingly this year they included a couple of halls of classic Bikes.

This is a 1920s Norton, I'm not sure what model it is, I think it is a model 18 or 19. Feel free to tell me.

A lovely little 2 stroke Coventry Eagle, I have a photograph somewhere of my Mother sat on one of these when she was a young Lass!

A Wooler. Quite a rare thing, John Wooler made prototype motor bikes from 1911 through to the 1950s among them were some very interesting configurations of beam engines and shaft drives, they all had the tank and headlamp moulded into the sort of shape shown above, which gave the whole genre the nick-name "Flying Bananas"

A 1930s Scott. 600cc 2 stroke watercooled twin. Sometimes referred to as a "Yowler" because of the distinctive exhaust noise.

This is a Triumph "Junior" Poor photo, sorry.

Norton Dominator 99 in a featherbed frame. Pure Dream.

An Early HRD which of course became Vincent. A 1000cc V-Twin, amazing piece of engineering.

This is the MUCH later version of the HRD above, with a Vincent Black Shadow engine in a Egli frame. I could sell my Granny for one of those.

There were quite a few cars at the show, I will put a few interesting one on this organ shortly.

Monday, 8 November 2010

Sawley Abbey

For years, riding one or other of the motorbikes towards the countryside to the north of Jones Towers, I have ridden past Sawley Abbey. Only recently did I manage to stop and walk around the place. Well worth a few minutes of your time if you are anywhere near the Clitheroe area. It is signposted off the A59 just to the East of Clitheroe.

A nice view of Pendle Hill taken 'contra-jour' with part of the Abbey silhouetted against the autumn sky

She who must be obeyed stood by what used to be the monks Lavvies

Apparently a Cistercian Abbey founded in 1147 or 1148 on the banks of the River Ribble, by William Percy II. Although the old Monks found the place rather inhospitable and the weather inclement, they were there until 1536 when Henry VIII pulled the plug.
As I said if you are anywhere near it is worth a visit and it is FREE! Other than that google it.

Saturday, 30 October 2010

Whitby

Just returned from a short break in Whitby. We had never been there before, quite an interesting little spot but it was very busy, as we are approaching Halloween, they are holding a Goth weekend!
We spent a couple of days driving up and down the immediate coast, visited Scarborough - not too impressed as it was again very busy and nowhere to park, so we had a walk along the beach to the north of the headland, drove through the middle of town and carried on heading back up North.
On the way back we discovered Ravenscar (worth Googling) it has a fascinating history.

This is looking towards Robin Hood's Bay from Ravenscar

Just to the North of Whitby we discovered Sandsend, a small village but very pretty and a pleasant section of beach for Jay the Autistic Spaniel to run around and play.
This is your's truly with Jay the Autistic Spaniel on the Sandsend beach, with Whitby Abbey just visible in the background.

And this is a view from midway between Whitby and Sandsend, looking north toward Sandsend on a lovely mild autumn day.
All in all a nice part of the world, some rather good fish and chip emporia and one or two steep hills to climb in order burn off the extra calories consumed.





Sunday, 24 October 2010

Wood Turning

I have been attempting wood turning for quite a few years, attempting being the operative word as for many years all I had was a very primitive 'bolt on the bench' type of lathe made by a company called Wolfcraft. Around a year ago, the Lathe shown below was given to me by my friend Gareth, in memory of his father and my friend Harry Turner with whom I spent some time, especially during his last few weeks. I don't need reminding of Harry, but I think of him often when I am using the Lathe.

I have not had any formal instruction in wood turning, but thanks to the wonders of the inter-web, I have spent a considerable amount of time watching instructional videos on various turning sites, and on the wonderful 'you-tube'
Below are a few samples of the things I have been making.

Light pulls, and an etui - that is a needle case

Three spinning tops made from Oak, Pear wood, and Mahogany

A lidded box from a small piece of Teak, a goblet shaped Tea-light holder made from Stag's Horn Sumach (Rhus Typhinus) and a simple bowl made from (I think) Elm. The Elm came from a snooker table leg which I acquired earlier this year.

I have just started going to a wood turning club, so hopefully I will get some advise, tips, and inspiration from the other members. If you want to see some examples of their work go to www.pendlewoodturners.co.uk

Monday, 18 October 2010

Stafford Show


Along with my good friends Jack N. I visited the Stafford Classic Mechanics Show yesterday, at the Stafford Showground and we were blessed with quite good weather for the time of the year. The only slight down side was that the autumn show is really dedicated to Japanese and other 'foreign' bikes. There were some interesting stalls and a fair few of the british owners clubs present but the ratio was greatly in favour of the Japanese machines.

Don't get me wrong, I have nothing against Japanese motorbikes, in fact I greatly admire the engineering capabilities of the said genre, however I have never owned a eastern machine and have a greater love for British bikes (followed of course by American and European)

Below are just a few of the machines I could lust after:


A Brough Superior SS100 It was a similar model to this that T.E. Lawrence (Laurence of Arabia) rode, and eventually crashed and killed himself.


This is a lovely Ducati 175cc overhead camshaft engine with desmodromic valve gears. That means the inlet and exhaust valves were opened and closed mechanically thus doing away with valve springs and therefore valve bounce. a lovely example of 1960s Italian design.

This is a Douglas, I didn't make note of the model or the year, It is certainly 1920s and an horizontally opposed twin cylinder probably 350cc. Note the external flywheel, exposed primary chain, and almost complete lack of a front brake.

This is a Royal Enfield 250cc Crusader Sports. (approx 1964) I well remember as a young schoolboy waiting for my bus home near the bus station in Ardwick, Manchester, there was a motorbike shop and for quite a while that shop had one of these in the window. Just the same, signal red, clip on Handlebars and that big sporty looking front wheel hub. I thought it was the most beautiful thing in the world. Secretly I would still love to own one, though I doubt I ever will.

Finally this is a War Department Triumph TRW. A sidevalve 500cc parallel twin, I believe the engine was originally designed to power static generators and later adapted to fit in a motorcycle frame. I don't know why but I have always admired these machines, you don't see many on the road but they have a certain charm. I would rather own one of those than any 200mile per hour Japanese rocket ship. OK I admit it I'm a sad old sod.